Stainless steel wire

- May 07, 2018 -

stainless steel wire-1.jpgStainless steel wire drawing (stainless steel wire drawing) under the action of drawing force, the wire rod or wire billets from wire drawing die die out, in order to produce small section steel wire or metal plasticity processing non-ferrous metal wire.All kinds of metal and alloy of different section shapes and sizes of wire can be produced by drawing.Pull out the silk, the size is accurate, the surface is clean, and the drawing equipment and the mold is simple, the manufacture is easy.


Generally, the austenitic, ferrite, bidirectional stainless steel and martensitic stainless steel are mainly divided into 2 series, 3 series, 4 series, 5 series and 6 series stainless steel.


316 and 317 stainless steel (the performance of 317 stainless steel) is of molybdenum stainless steel.The molybdenum content of 317 stainless steel was a little bit clever than 316 stainless steel. Because of molybdenum in steel, stainless steel, the steel grade overall performance is better than 310 and 304, under the condition of high temperature when the concentration of sulfuric acid is less than 15% and higher than 85%, the 316 stainless steel has a wide range of USES.316 stainless steel also has good resistance to chloride corrosion, so it is usually used in Marine environment.The maximum carbon content of 316L stainless steel is 0.03, which can not be used for annealing after welding and the use of maximum corrosion resistance.


Frandcom industrial limited use good quality of SUS304 and SUS3160 etc to produce stainless steel shots and stainless steel cut wire,welcome your inquiry.



stainless steel wire-3.jpg  stainless steel wire-4.jpg


  • Stainless Blasting Shot and Grit
  • Matallic Abrasives for Blasting
  • Cut Wire Shot
  • Ship Cleaning Grit Angular Steel Grit for Ship Hull Surface Treatment
  • Bearing Steel Grit GL40
  • Bearing Steel Grit GH120

Related Products