Measures To Reduce The Consumption Of Steel Shot Of Shot Blasting Machine

- Aug 01, 2017 -

1. Adjust the angle of the shot blasting machine; make the steel shot steel sand effectively on the workpiece at the same time to avoid the use of steel shot grit in the pills or dust discharged.

2. timely recovery of leakage in the shot blasting machine outside the steel shot grit.

3. To prevent steel shot gills with the workpiece away.

4. Always check the shot blasting machine for damage.

5. Reasonably add settling chamber.

6. Temporarily replace the shot blasting machine sealing plate.

7. Do a good job shot blasting machine steel shot grit back ash recovery screening.

  • Shot Blasting Steel Grit GL14 for Used for Surface Pretreatment of Steel Pipes
  • Grit Blasting Media GH Steel Grit GH12 Used for Surface Pretreatment of Automotive High Strength Gears
  • Made from Tyre Steel Wires the Best Blasting Media Steel Cut Wire Shot for Surface Treatment
  • Cleaning Abrasive Sandblasting Stainless Steel Shots SUS430
  • High Quality Blasting Media Abrasive Zinc Shots Zinc Rounded Shot 0.6mm
  • China Supplier of Foundry Slag Remover Slag Coagulant for Casting

Related Products